Blog

Technical Papers
Topic: Painting & Printing Processes

1 minute read
Surface Analyst vs. Dyne Inks: Which is the Better Solution for Surface Testing?

Surface Analyst vs. Dyne Inks: Which is the Better Solution for Surface Testing?

Author: Brighton Science

Technical Paper: Dyne Inks & Wetting Tension This paper explains how dyne inks compare to contact angle measurements obtained by the Surface Analyst.

Read

Topics: Surface Preparation & Treatment, Quality & Manufacturing Operations, Painting & Printing Processes

Posts by Topic

Show All

Subscribe to Our Blog
1 minute read
Water Contact Angle Correlation to Crosshatch Adhesion Tape Test in Accordance with ASTM D3359-09

Water Contact Angle Correlation to Crosshatch Adhesion Tape Test in Accordance with ASTM D3359-09

Author: Brighton Science

Manufacturers are familiar with adhesion challenges when attempting to bond, paint, etch, or coat a substrate. Poorly prepared surfaces can undoubtedly produce problematic adhesion issues.

Read

Topics: Cleaning Processes, Product Development, Bonding & Sealing Processes, Painting & Printing Processes

1 minute read
Water Contact Angle as a Quantitative Measure of Total Polyethylene Surface Energy

Water Contact Angle as a Quantitative Measure of Total Polyethylene Surface Energy

Author: Brighton Science

A wide variety of plasma treatments were performed on polyethylene surfaces, resulting in a wide range of total surface energies.

Read

Topics: Cleaning Processes, Product Development, Bonding & Sealing Processes, Coating Processes, Painting & Printing Processes, TQM/Lean Six Sigma